User Manuals

ESC 400 Control

ESB 210 Control

All Drive Winches

All Slider Types

ESC 300 Control

ESC 200 Control

All Manure Removal Robot Types

All Motor Types

FAQ: Controls

ESB200, ESB210 + ESC200 Reset System

Display Motor Current for ESB210 + ESC200 - Motor Diagnosis

Disable Voltage Monitoring for ESB210

ESC300 Voltage Error E13

Change ESC300 Radio Channel

Display Motor Current for ESC300 - Motor Diagnosis

ESC300 Emergency Operation

ESC300 Reset Radio Channel

FAQ: Operation of the Systems

DRUM CHANGE ON A SINGLE WINCH

RETROFITTING FROM CONCRETE TO RUBBER FLOOR

A retrofit kit for welding is available, which enables the conversion from concrete to rubber floor. This includes widenings on the center block and base frame as well as the corresponding recess for the U-guide.

GEAR MOTOR: OIL FILLING QUANTITY AND TYPE

Filling quantity in liters:

  • ABM 0.55 kW 1.2
  • ABM 0.75 kW 2.8
  • Himmel 0.55 kW 1.3
  • SEW 0.75 kW 5.9

 

Recommended oil type:

  • ABM ARAL Degol BG 220
  • Himmel/SEW CLP VG 220 mineral

INSTALLING A U-GUIDE

SLIDER ALWAYS STAYS STILL IN COLD WEATHER

Slider, rope and/or deflection pulley frozen

-> Make parts mobile again
-> Activate frost program in time

WINCH RUNS HEAVILY

Presumably the shaft seal between the gearbox and electric motor is leaking. Recognizable if the motor is oily.

ROOM FLAP NO LONGER RISES

Sliding skis are worn out and/or the clearing plate is too short

Rope Change

Defective rope must be unwound at a slow speed. When rewinding, care must be taken to ensure that the first layer of rope is wound cleanly onto the drum.

CORRECT ATTACHMENT OF PLASTIC ROPE

UNROLLING PULL ROPE CORRECTLY

ATTACH RUBBER STRIP TO CLEARING PLATE

CREATING A ROPE LOOP

Vielen Dank!

Ihre Nachricht wurde an uns übermittelt.